Autor Tema: BMW  (Posjeta: 11902 )

0 Članova i 1 Gost pregledava ovu temu.

Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
BMW
« : Rujan 07, 2008, 00:12:26 am »
2008 - 30   15
0818/08   Germany   
Category: Motor vehicles
Product: Motorcycles

Brand: BMW
Type/number of model: Models F800S, F800ST, R1200R, K1200S, K1200R Sport, K1200GT, types E8ST, R1ST, K12S, K12R

Description: Concerns vehicles built between 26 March 2007 and 20 April 2007.

Country of origin: Unknown   

No picture available



Injuries

The product poses a risk of injuries because the steering dampers of the vehicles concerned have a nickel coating which is susceptible to peeling. The resulting chips can cause a partial or total blockage of the damper oil bores. This can make the steering stiff. Blocking can occur only as a result of large-scale loss of coating and at full lock (turning, manoeuvring). If the steering blocks during travel, falls and injuries can occur.
Voluntary corrective actions taken by the importer.

« Zadnja izmjena: Rujan 07, 2008, 00:47:43 am James1100 »
google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: RAPEX - BMW
« Odgovori #1 : Rujan 07, 2008, 00:12:44 am »
2008 - 28   25
0782/08   Germany   
Category: Motor vehicles
Product: Motorcycle - BMW Motorcycles

Brand: BMW
Type/number of model: F 800 GS

Description: Models from 2007 and 2008. The VIN range is: ZT62000 - ZT66220.

Country of origin: Germany

No picture available



Injuries

The product poses a risk of injuries because the front brake calliper may not be fixed in position with the sufficient tightening torque. If the screw joints of the brake calliper become loose, the front wheel can be jammed.
Voluntary corrective action taken by the manufacturer.

google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: RAPEX - BMW
« Odgovori #2 : Rujan 07, 2008, 00:13:27 am »
2008 - 27   12
0738/08   Germany   
Category: Motor vehicles
Product: Motorcycles

Brand: BMW
Type/number of model: Model R1200GS, type R12

Description: Concerns motorcycles built between December 2002 and October 2007.

Country of origin: Germany   

No picture available



Injuries

The product poses a risk of injuries because in the event of inappropriate handling, such as pulling roughly, hitting objects while manoeuvring, or if the motorcycle falls over, the hand protector on the handlebar controls can twist. It could then touch the handbrake or clutch control causing brake or clutch malfunction. In addition, if the twisted hand protector lightly touches and operates the handbrake control, the brake linings may touch the brake disc and the resulting heat generation would cause the brake pressure to build up which could slow down the front wheel, even so far as to block it.

Three incidents reported.
Voluntary corrective action taken by the manufacturer.

google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: RAPEX - BMW
« Odgovori #3 : Rujan 07, 2008, 00:14:24 am »
2008 - 15   17
0433/08   Germany   
Category: Motor vehicles
Product: Motorcycle

Brand: BMW
Name: BMW F 800 S and BMW F 800 ST
Type/number of model: K71 / F-series. Approval type: E8ST. Approval number: e1*2002/24*0283

Description: Motorcycles manufactured between January 2005 and November 2007 are affected. Vehicle Identification Numbers (VIN):

- F 800 S: ZP15000 - ZP23168
- F 800 ST: ZR00000 – ZR09416.

Country of origin: Germany   

No picture available



Injuries

The product poses a risk of injuries because of insufficient pressure equalisation in the fuel tank which may cause it to expand close to the rear wheel and thus become damaged by rubbing against the rear wheel tyre.
Voluntary corrective action taken by the manufacturer

google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: RAPEX - BMW
« Odgovori #4 : Rujan 07, 2008, 00:14:51 am »
2007 - 48   15
1267/07   Germany   
Category: Motor vehicles
Product: BMW G 650 Xchallenge; G 650 Xcountry and G650 Xmoto motorcycles.

Brand: BMW.
Type/number of model: Vehicle type E 65X, EG type-approval e11*2002/24*0500*. G650 Xchallenge XA80000 – XA81637; G650 Xcountry XA60000 – XA62134; G650 Xmoto XB0000 – XB60405.

Description: The vehicles concerned were manufactured from 07.2006 to 03.2007.

Country of origin: Germany.   

No picture available



Fire.

The product poses a risk of fire because during the manufacturing process for the fuel lines, there were some isolated cases of minor damage to the fuel lines. Fuel could leak through the textile housing of the line ends and cracks could form in the fuel lines. The possibility of the fuel igniting on contact with hot vehicle parts cannot therefore be excluded.
Voluntary corrective action taken by the producer.

google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: RAPEX - BMW
« Odgovori #5 : Rujan 07, 2008, 00:15:21 am »
2007 - 36   5
0918/07   Germany   
Category: Motor vehicles
Product: Motorcycles – BMW Motorcycle Dakar

Brand: BMW
Type/number of model: models F650GS and F650GS Dakar E650G; EC type approval: e1*2002/24*0200

Description: The vehicles were manufactured between 10 January and 6 March 2007.

Country of origin: Germany   

No picture available



Injuries

The handlebars might come loose from their correct position while the motorcycle is being manhandled or ridden so that there is a risk of falling.

The upper yokes and both handlebar retaining clamps of the vehicles in question are being replaced.

One accident involving material damage or personal injury has been reported worldwide.
Voluntary corrective actions taken by the manufacturer

google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: RAPEX - BMW
« Odgovori #6 : Rujan 07, 2008, 00:15:52 am »
2007 - 1   4
0023/07   Germany   
Category: Motor vehicles
Product: Motorcycle BMW R 1200 GS with tyre pressure monitoring system (RDC) (SA 530)

Brand: BMW
Type/number of model: EC-type approval: e1*2002/24*0199*04, vehicles manufactured from 1 September till 20 October 2006
Country of origin: Unknown

No picture available



Injuries

The combination of cross-spoke rim and tyre pressure monitoring system may produce a slow and also a sudden loss of air pressure. Sudden loss of air pressure means that the vehicle can no longer be controlled safely.

The vents of affected vehicles are replaced with tyre pressure monitoring sensors and the tyre pressure monitoring system is deactivated.
Voluntary corrective actions taken by the importer

google master



Offline Too Slow

  • Dežurni zajebant i spammer
  • Administrator
  • *****
  • Postova: 1.114
  • Karma: 122
  • Spol: Muški
  • Rotten to the Bone
Odg: BMW
« Odgovori #7 : Rujan 07, 2008, 04:42:17 am »
Jebate...ak gledaš po svemu ovome nabrojenom nikad nebi kupil Bemburu...em rikavaju gume,em volani,pa se malo može zakuriti zbog curenja goriva,onda amortizeri volana rade pizdarije......uffffff....ko bi rekel da se to događa jednom BMWu koji je navodno sinonim za pouzdanost.
As I walk through the valley of death
I fear no one because everyone's dead
I chose this knife, it's all i need by my side
MY GOD IS PAIN


CuC Slow te gleda...

Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: BMW
« Odgovori #8 : Rujan 12, 2008, 10:19:02 am »
google master



Offline koma

  • Zagreb, Kvatrić
  • Interceptor
  • ***
  • Postova: 645
  • Karma: 28
  • Spol: Muški
  • obnavljam moto guzzi falcone 500 '70.
Odg: BMW
« Odgovori #9 : Rujan 12, 2008, 11:13:14 am »
hihi. moj je napravljen '95- te.
što je i bilo, ispravljeno je do sad.
pregledao sam ga prema tim noticama još prošle godine i bivši vlasnici su bili dobro inforirani.

puusta sreća  :glasses9:
grč. - κῶμα

Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: BMW
« Odgovori #10 : Rujan 12, 2008, 12:18:08 pm »
Ne stignem pregledati sve linkove, ali se trudim da ih sve imamo ovdje. Neka budući vlasnici novih ili rabljenih motora imaju gdje pogledati kakve su im buduće kobile.
google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: BMW
« Odgovori #11 : Listopad 27, 2008, 00:23:42 am »
2008 - 42      17
1197/08    Germany    

Category: Motor vehicles
Product: Motorcycles

Brand: BMW
Type/number of model: Type RHP2, Model Enduro HP2 / K25/HP

Description: This affects vehicles built between 2004 and 2006 with the type-approval number e1*2002/24*0254*00 and additions.

Country of origin: Germany

No picture available



   Injuries

The product poses a risk of injuries because, in certain cases, the front bolt of the paralever can come loose. If the bolt comes out completely, the stability of the rear-wheel drive unit is no longer ensured and the vehicle may be unsafe to ride.

   Voluntary corrective action taken by the manufacturer
google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: BMW
« Odgovori #12 : Veljača 01, 2009, 20:31:35 pm »
2009 - 3      34
0120/09    Germany    

Category: Motor vehicles
Product: Motorcycles - BMW F 650 GS, BMW F 800 GS

Brand: BMW
Type/number of model:, type E8GS

Description: The affected vehicles were manufactured between May 2007 and 17 August 2008 and have the type-approval number e1*2002/24*0352.

Country of origin: Germany

No picture available



   Injuries

The product poses a risk of injuries because the procedure used in the past for torquing the threaded fasteners securing the sprocket to the sprocket carrier (tightening torque 25 Nm) resulted in excessive fluctuations in preload force, on account of the fact that the nuts used are of the self-locking type with clamping element. This, in turn, meant that individual threaded fasteners worked loose.

   Voluntary corrective actions taken by the manufacturer.
google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: BMW
« Odgovori #13 : Veljača 01, 2009, 20:33:27 pm »
2009 - 2      2
0043/09    Germany    

Category: Motor vehicles
Product: Motorcycles - BMW F 650 GS

Brand: BMW
Type/number of model: type E8GS

Description: The affected motorcycles were manufactured between May 2007 and 29 August 2008 and have the type-approval number e1*2002/24*0352.

Country of origin: Germany

No picture available



   Injuries

The product poses a risk of injuries because the reduced torque suffices to release the threaded fasteners securing the front brake disc. At the limits of the range of tolerances the depth of engagement of the threaded fasteners might be insufficient. There is a possibility of threaded fasteners working loose. Under worst-case conditions there is a possibility of the brake disc becoming loose. Consequently, the possibility of safety-critical riding conditions occurring cannot be excluded.

   Voluntary corrective actions taken by the manufacturer.
google master



Offline James1100

  • Zapreššić
  • Administrator
  • *****
  • Postova: 4.839
  • Karma: 302
  • Spol: Muški
  • mečku... opet
Odg: BMW
« Odgovori #14 : Svibanj 10, 2009, 22:55:25 pm »
2009 - 17      26
0611/09    Germany    

Category: Motor vehicles
Product: BMW motorcycles

Brand: BMW
Type/number of model: BMW F 800 GS, Type E8GS.

Description: The motorcycles concerned have a type-approval number e1*2002/24*0352 and were built between August 2008 and October 2008.

Country of origin: Germany

No picture available



   Injuries

The product poses a risk of injuries because, due to irregularities in the manufacturing process, the front-wheel quick-release axles could break due to reduced wall thickness. Severe loads on the front wheel (off-roading, for example) could cause damage to the quick-release axle.

   Voluntary corrective actions taken by the manufacturer.

   

google master